Preparing aluminium for welding: edge geometry and surface cleaning
Preparing aluminium for welding involves two separate tasks: producing the required joint geometry and preparing the surface. An edge that looks clean may still have incorrect geometry, while a precisely formed groove can retain contamination that must be removed.

Establish the joint requirements first
The required bevel, groove shape and dimensions are determined by the joint design and welding process. They should not be adapted to whichever grinding tool happens to be available. Preparation must produce the specified geometry in an inspectable, repeatable way.
The aluminium alloy and its condition also influence the choice of stock-removal tool. A tool suitable for a softer material may differ from one needed for a harder alloy. Consider chip formation and the risk of material adhering to the tool as well as access and the available machine.
Surface cleaning is a separate operation
Removing oxide and surface contamination is not the same task as machining the groove. Geometry preparation concerns material removal; cleaning must produce the specified surface condition without unnecessarily altering dimensions.
An appropriate brushing, abrasive or other cleaning method can be selected for the task. Define the method in conjunction with the welding process. A shiny surface alone does not establish that a component is ready for welding.
Consider what the tool carries with it
A tool previously used on another material can transfer contamination to aluminium. The accessories' usage history and segregation therefore belong to preparation just as much as selecting the right tool type.
Also consider lubricants and process aids. A substance that makes cutting easier may not be permitted to remain on the surface to be welded. Use only materials and cleaning methods compatible with the next operation. Establish any required removal method in advance.
What should the operation sequence record?
- The base material, its condition and the required joint geometry.
- The tool used to produce the geometry and the inspection point.
- The separate surface-cleaning method and its acceptance criterion.
- Process aids used during machining and their required removal.
- The arrangements for handling, storing and handing over the cleaned component.
The handover then establishes more than simply that the edge is finished: it makes clear which operations have been completed. If a recurring defect appears, geometry and cleaning can be investigated separately.
For a tooling discussion with Ferroszerszám, prepare the drawing requirements, material grade and proposed operation sequence. These provide the basis for selecting suitable methods for both edge preparation and cleaning.
