VSM abrasives for your production process.

VSM abrasive belts and discs provide options for working on different materials and surfaces. Grain, backing and machine application need to be considered together when choosing a product.

Belt grinding with sparks in a VSM ACTIROX demonstration.

Product families

Compare more than grit size alone. Backing flexibility and the intended grinding method are also part of the manufacturer’s product information.

VSM abrasive belt.

Abrasive belts

For portable and stationary belt grinders, from stock removal to finishing. Backing flexibility, belt joint and contact conditions matter alongside dimensions.

VSM fibre discs.

Discs and fibre discs

For faces, edges and welds. In addition to size and speed compatibility, backing-pad stiffness affects how the abrasive contacts the workpiece.

VSM ACTIROX abrasive belt and fibre discs.

ACTIROX and ceramic grains

ACTIROX uses geometrically shaped ceramic grain; CERAMICS Plus also targets demanding stock removal. Evaluate these technologies where the machine and process can supply appropriate grinding pressure.

VSM COMPACTGRAIN abrasive belts and discs.

COMPACTGRAIN long-life abrasives

Agglomerate grain technology for repeated grinding operations. Especially relevant when consistent finish and abrasive behaviour over the belt’s working life need to be assessed together.

VSM ILUMERON RK700X fine-finishing belt.

Fine finishing: ILUMERON and XELERION

Technologies developed for fine finishing. Selection starts with the final surface specification and the scratch pattern left by the preceding operation.

VSM ALU-X abrasive belt and disc.

Aluminium and general-purpose work

ALUX technology addresses loading when processing non-ferrous metals. Aluminium oxide and non-woven solutions serve other needs, including intermediate sanding and finishing.

Stock removal and surface finishing in one process.

Close-up of VSM ACTIROX shaped ceramic grains with a grain geometry diagram.

Series finishing of stainless parts

Build the grinding sequence around the surface specification. A representative part helps assess finish, removal rate and cycle time together.

Machine and robotic grinding

Contact, pressure and belt speed determine abrasive loading. Tool and process must be matched before the operation can be transferred reliably to automation.

Processing aluminium parts

Loading and heat can affect the result. Review grinding pressure and working method alongside the choice of abrasive for the alloy.

Which grain and backing fit the task?

Grit size alone is not enough for a recommendation. We discuss material, machine, belt speed, contact element, wet or dry processing and the required finish.

In production, time per part and finish consistency matter alongside abrasive consumption. Ferroszerszám helps define comparison criteria that reflect your actual operation.

Catalogues

The 2026/2027 product range publication is in English. Its information key explains backing, material suitability and grinding application symbols.

VSM – Product range 2026/2027

VSM – Product range 2026/2027

English · 114 pages · 31.3 MB

Catalogue presenting the VSM abrasives range.

The publication states validity from January 2026.

Open catalogue
VSM – ACTIROX

VSM – ACTIROX

English · 12 pages · 2.9 MB

Brochure on the ACTIROX product family for rough grinding.

Open catalogue
VSM – ALU-X

VSM – ALU-X

English · 12 pages · 1.7 MB

Brochure on ALU-X abrasives for aluminium and other non-ferrous metals.

Open catalogue
VSM – CERAMICS

VSM – CERAMICS

English · 8 pages · 1.0 MB

Product information on CERAMICS ceramic-grain abrasives.

Open catalogue
VSM – COMPACTGRAIN

VSM – COMPACTGRAIN

English · 8 pages · 1.0 MB

Brochure on the COMPACTGRAIN abrasive family for surface finishing.

Open catalogue
VSM – Metal grinding

VSM – Metal grinding

English · 16 pages · 4.4 MB

Overview of metal grinding applications and abrasives.

Open catalogue
VSM – Fibre discs

VSM – Fibre discs

English · 8 pages · 1.1 MB

Publication presenting the VSM fibre disc family.

Open catalogue
VSM – Weld edge preparation 2026

VSM – Weld edge preparation 2026

English · 8 pages · 0.9 MB

Abrasives and application guidance for weld edge preparation.

Revision stated in the publication: June 2026.

Open catalogue
VSM – Non-woven abrasives

VSM – Non-woven abrasives

English · 6 pages · 0.5 MB

Overview of non-woven abrasives and their applications.

Open catalogue
VSM – XELERION

VSM – XELERION

English · 12 pages · 2.8 MB

Brochure on the XELERION finishing product family.

Open catalogue

ACTIROX AK895Y abrasive belt

To play this external video, allow its provider through Cookie settings in the footer, then press Play again.

Open video

History

Siegmund Oppenheim and Siegmund Seeligmann founded VSM in Hanover in 1864. The business developed from handmade abrasive paper into a specialist in coated abrasives for industrial grinding and finishing.

In 1930, VSM stopped building machines to concentrate on abrasives. Grain technology is now as important to its range as belt or disc format: aggressive stock removal and a fine, consistent finish require different abrasive behaviour.

Milestones

  1. 1864

    Siegmund Oppenheim and Siegmund Seeligmann establish the predecessor business.

  2. 1930

    Following machine-production closure, the focus shifts to coated abrasives.

  3. 2018

    Shaped ceramic grain and single-step grinding/polishing technology are introduced.

  4. 2023

    New abrasives address aluminium and non-ferrous metals.

  5. 2024

    A structured abrasive expands fine surface-finishing capabilities.

Frequently asked questions

Does the same grit size mean the same result?

Grit size is only one product characteristic. Compare the grain type, backing and recommended application in the manufacturer’s information as well.

What matters when grinding contours and tight radii?

Backing flexibility is a separate selection criterion. VSM product descriptions relate it to the application, so match the specific belt type to the workpiece geometry.

What is needed for a VSM belt quotation?

Specify belt width and length, material grade, machine and target finish. For an existing product, include its type designation and grit size in your enquiry to Ferroszerszám.

Request advice

Specify belt width and length, material grade, machine and target finish. For an existing product, include its type designation and grit size in your enquiry to Ferroszerszám.

Contact us
Loading...
Back to top