Merkle welding equipment and torches.

Merkle’s range covers MIG/MAG and TIG equipment, welding torches and mechanised solutions. The right configuration starts with the base material, joint and production workload.

Automated welding with Merkle equipment.

Product families

Power source, torch and accessories form the working setup together. Discuss the specific versions alongside the welding process and operating conditions.

Control panels of Merkle HighPULSE pulsed welding systems.

MIG/MAG and pulsed welding

GreenMIG and HighPULSE are part of the manufacturer’s welding equipment range. Choose the process around material, thickness, welding position and acceptable finishing work.

Merkle HighTIG TIG welding unit.

TIG welding equipment

LiteTIG, HighTIG and Insquare series address TIG welding tasks. Duty cycle, adjustment requirements and torch access matter, particularly on small or thin-walled components.

Merkle handheld MIG/MAG welding torch.

Welding torches

The range includes manual, machine, fume-extraction and push-pull MIG/MAG torches. Torch weight, cooling and wear parts affect daily use just as much as the power source’s rated output.

Merkle welding carriage on a metal workpiece.

Welding mechanisation

Positioners and welding carriages can support repetitive circumferential or longitudinal seams. Assess mechanisation against accessible weld length, fixtures and consistency of preparation.

Merkle WeldROB robotic welding workstation.

WeldROB robotic welding

WeldROB is the manufacturer’s complete robotic welding system. Investment assessment should include tacking, fixtures and part exchange in the cycle, not welding time alone.

From the joint to the complete welding task.

Merkle

Steel structures and machine frames

Spatter and cleaning time matter alongside weld quality. Run comparisons on the same joint, material and wire, then evaluate the complete operation.

Stainless and thin-walled components

Heat input, distortion and visible seam requirements jointly define the process. Measure the component after welding instead of judging only the initial appearance of the bead.

Repetitive welding tasks

Automation can be assessed meaningfully when fit-up and workholding are predictable. Changeover time may dominate short batches, while steady part supply matters more in longer runs.

Which process and equipment configuration are needed?

For a quotation, start with base material, thickness range, joint type and daily welding time. Confirm the electrical supply, shielding gas, wire and inspection requirements. Rated current alone is not enough to select a machine.

Include post-weld grinding and cleaning in the discussion with Ferroszerszám. If a process reduces finishing work, its value should be assessed through total labour time per component, supported by a documented trial.

Catalogues

The selected German full catalogue carries an 08/2026 edition mark. Its price list is not a Ferroszerszám quotation; technical and commercial scope must be agreed for the chosen configuration.

Merkle – Complete catalogue 2026

Merkle – Complete catalogue 2026

German · 336 pages · 10.8 MB

Catalogue of Merkle welding products and accessories.

The publication states validity from 1 August 2026.

Open catalogue

WeldROB 7 welding cobot

To play this external video, allow its provider through Cookie settings in the footer, then press Play again.

Open video

History

Merkle was founded in Germany in 1964. Its Kötz operation develops and manufactures welding power sources, torches and automated equipment.

The portfolio extends from manual welding to mechanised and robotic systems. Comparing equipment therefore means considering the entire welding setup required for the job, not just a power source.

Milestones

  1. 1964

    Wilhelm Merkle founds the company in Waldstetten.

  2. 2019

    The December manufacturer brochure presents complete WeldROB robotic welding systems.

Frequently asked questions

What is needed to select a welding process and machine?

Specify the base material, thickness range and joint type. Clarify shielding gas, filler material and quality control requirements as well.

Is rated welding current enough to choose a machine?

Daily welding time and operating conditions also matter. Match torch, cooling and accessories to the specifications of the particular power source and the application.

What should I send with a Merkle quotation request?

Send Ferroszerszám the material, thickness, joint drawing or photograph and daily workload. When extending an existing setup, also specify the exact power source and torch models.

Request advice

Tell us which product you need or describe the task. Let’s discuss a suitable solution.

Contact
Loading...
Back to top