Planning robotic grinding and deburring

Volume is one part of the brief. Incoming-part variation, fixturing, tool wear and acceptance requirements matter just as much.

Robotic grinding with a Mirka system

Start with the workpiece

A robot cell needs a defined part and operation. Specify the burr to remove, the edge to leave and the variation between incoming parts. Establish whether the cell will run long batches or frequent product changes. These decisions shape the design before a robot brand is selected.

Alongside the current cycle time, prepare the part drawing, a representative sample and acceptance criteria. Define the target with loading, machining, inspection and changeover in view. This makes the complete workstation part of the design.

Plan for tool wear

PFERD offers burrs, fine-grinding tools, polishing tools and industrial brushes for robot applications. Burr condition, material, access and finish requirements guide the selection. The manufacturer also describes application support specifically for robotic processing.

Evaluate the selected tool both when new and during its working life. Include replacement, wear observation and acceptance checks in the trial plan. Programming must also account for the operating limits specified by the manufacturer.

Choose the right cell layout

In IMM RC systems, the robot can guide a tool to the workpiece or move the workpiece between processing stations. These layouts create different gripping, access and handling requirements. Suitability needs to be assessed against the actual task.

Automation can also take other forms. GECAM, for example, offers belt-and-brush deburring machines for sheet-metal parts. Product mix, volume and required flexibility help decide between a robot cell, a dedicated machine and improvements to the existing workstation.

Prepare the engineering brief

Selecting a tool and designing a robot cell are different project scopes. A complete system also needs the production interfaces and acceptance arrangements defined. The following provides a starting point for that discussion.

From planning to commissioning

Ferroszerszám’s robotics service spans machining tools, robot selection and programming through to complete cell integration. We work with robot and system manufacturers. Each proposal follows design work for the specific application.

For a new cell or an existing process improvement, start with the workpiece. Bring the drawing, sample and machining problem. These help us identify the technical participants required, the evaluation approach and the next engineering step.

Technical sources

Loading...
Back to top